Structural performance and characteristics:
Number of hot plates: 12, 16, 20, 22 fast.
The surface of the heating plate is grinded, the width of the heating plate is 600mm, and the cooling setting is 7 meters long.
The heating plate is made of container plate, with pressure vessel certificate and inspection certificate. The inside of the hot plate is a partition isolation structure, which makes the steam flow in an S-shaped direction, which has obvious steam and water separation functions, and improves the steam utilization rate.
The hot plate adopts intensive gravity-pressed silver structure or hot-pressed plate structure, which can be adjusted pneumatically in sections according to different layers of cardboard.
The left and right deviation correction adjustment of the upper conveyor belt adopts automatic adjustment on both sides, and the upper conveyor belt tension system is pneumatically adjusted by 2 sets.
The heat conduction piping of the heating plate controls the temperature in seven sections and is equipped with a temperature display.
The lower belt adopts an S-shaped manual deviation correction and tensioning mechanism, which has a simple and practical structure and a set of steam-driven fine-tuning type.
The auxiliary surface of the drive is covered with abrasion-resistant rubber, and has a medium height to ensure a smooth output of the cardboard.
The driving part adopts an independent gearbox structure, the gear is made of cast steel ZG-500 material, and the gear adopts oil-immersed lubrication.
The electrical components adopt internationally renowned brands, and the components work stably and operate reliably.
The main drive motor is a frequency conversion energy-saving motor with large low-speed torque, wide speed range, reliable use and simple maintenance.
The main frame adopts high-strength national standard profiles, with firm structure and beautiful appearance, suitable for high-speed work.
The hydraulic lifting gearbox adopts a hidden structure with beautiful appearance, which greatly reduces the area occupied.
The upper belt is equipped with an airbag automatic correction mechanism
Technical parameter:
| Parameter |
DFM-M4 |
| Control type |
Electric |
| Working width |
1400~2200mm |
| Working speed |
40m~250m/min |
| Cutting Length |
500~9999mm |
| Heating Method |
Steam Heating |
| Corrugating Roller |
ø280~405mm, 48CrMo alloy steel, hardness HRC58º~60º |
| Working power requirement |
380V 50HZ |
Audited Supplier 
){kind=link}
){kind=link}