1. As long as the mold is replaced, the equipment can produce blocks of different sizes and colors
Paving blocks.
2. Wide range of raw materials. There are cement, sand, fly ash, crushed stone, particle waste
Things, etc.
3. High frequency vibration of hydraulic system, low frequency feeding, pressure controlled by Mitsubishi PLC.interface. 3-5 people per production line.
4. The hydraulic transmission mechanism has interlock device, and the pressure of each mechanism can be adjusted arbitrarily Step drive cylinder. The vertical vibration system is fixed by four sliding bars, which is very easy to use,And fixed together with bottom mold vibration. High vibration pressure and high frequency.The product weight error is ± 2%, and the product strength is greater than 12MPa, and the error is 2%,The geometric dimension is less than ± 1.5mm.
5. Production site, brick machine stacking, pallet stacking area and production line area:
500 / 800m2, the total area of the plant is 3500m2, and the floor area is at least 3500 square meters.
6. The operation process is simple, and the raw material ratio is 10% - 12% cement, 40% 45% sand,
Fine stone 45% - 50%, cement: Sand: Stone 1:4:5. It can be produced everywhere.
7. According to the production rate, the daily consumption of raw materials is 150t.
3.5% by weight of raw materials.
8. Equipment investment depends on the development of market buildings. As long as there is construction, the effect can be achieved. investment
In the next few months, it pays off.
QT6-15 block machine parameters
| Overall Dimensions |
2890*1750*2550(mm) |
| Pallet Size(mm) |
850*700*18(GMT ) |
| Machine Weight |
5000 kg |
| The Frequency Of Vibrate |
3500/4800 |
| Max Excitation Force |
90 KN |
| Cycle Time(s) |
15 S -30 S |
| Installed Capacity(kw) |
82.7 KW |
| Specification: 390 * 190 * 190 |
6 pieces / board |
| Eight hour production |
9600 pieces |
Audited Supplier 
){kind=link}
){kind=link}